Some internal photos and the connector pinout for a Micron A10 thermal imaging core.
18 pin camera connector
Pin 1: Power
Pin 2: Power return
Pin 3: Power
Pin 4: Power return
Pin 5: Spare, do not connect
Pin 6: Digital ground
Pin 7: Analog video
Pin 8: Analog video return
Pin 9: RS232 transmit
Pin 10: Digital ground
Pin 11: RS232 receive
Pin 12: Spare, do not connect
Pin 13: Data sync plus
Pin 14: Data sync minus
Pin 15: Data out plus
Pin 16: Data out minus
Pin 17: Data clock plus
Pin 18: Data clock minus
The board connector is listed as JAE DA1B018H91 and the matching cable connector as DA1D018M91.
The analog video output needs a 75 ohm termination between video and video return. A normal composite video monitor may already provide that termination, so another resistor should not be added in parallel unless it is actually needed.
Success. I got a thermal image from the camera.
Internal, power board and test photos below.
Photos and videos
No comments:
Post a Comment